Sound Mechanics Joint Venture

M10 2 Ways 2 Drivers Monitor Bookshelf Speaker

•To design a speaker that is absolute phase linear and time coherent (an absolute point source) and suitable for various listening position and distance.
•The performance of many coaxial speaker was compromised by insufficient high frequency response, lack of bass tightness.
•Recognizing constrains of a conventional point source design, Sound Mechanics engineers have spent many years in developing a different approach. The result is essentially a 6 1/2"coaxial unit housed in a special 7 litres compact enclosure with a patented wave guide port. Mechanical phase linear and time coherence are achieved through the deployment of a radical 2nd order serial two-way crossover. The serial crossover not only presents a constant impedance load to the power amplifier, it also produces continuous in-phase signals during frequency and phase variations for the tweeter and woofer. The M7 is probably the first commercially produced point source speaker with both mechanical and electrical phase linearity. The components and internal wires of the M7 are the usual high performance/low tolerance parts specially selected or developed by Sound Mechanics.
•Recommended speaker stand: Sound Mechanics S35 and Sx200
•Dimension: 9"(W) x 8⅛"(D) x 13"(H)
•Weight: 7kg
•Sensitivity: 90 dB
•Impedance: 8 ohm nominal
•Frequency response: 60 - 19000 Hz
•US$600.00

Test Report (193KB)

M7 Coaxial Monitor Speaker

•To design a speaker that is absolute phase linear and time coherent (an absolute point source) and suitable for various listening position and distance.
•The performance of many coaxial speaker was compromised by insufficient high frequency response, lack of bass tightness.
•Recognizing constrains of a conventional point source design, Sound Mechanics engineers have spent many years in developing a different approach. The result is essentially a 6 1/2"coaxial unit housed in a special 7 litres compact enclosure with a patented wave guide port. Mechanical phase linear and time coherence are achieved through the deployment of a radical 2nd order serial two-way crossover. The serial crossover not only presents a constant impedance load to the power amplifier, it also produces continuous in-phase signals during frequency and phase variations for the tweeter and woofer. The M7 is probably the first commercially produced point source speaker with both mechanical and electrical phase linearity. The components and internal wires of the M7 are the usual high performance/low tolerance parts specially selected or developed by Sound Mechanics.
•Recommended speaker stand: Sound Mechanics S35 and Sx200
•Dimension: 9"(W) x 8⅛"(D) x 13"(H)
•Weight: 7kg
•Sensitivity: 90 dB
•Impedance: 8 ohm nominal
•Frequency response: 60 - 19000 Hz
•US$600.00

Test Report (181KB)

A

Acousta SM115

•A totally redesigned Acousta 115 by SoundMechanics.net engineers to ensure a smooth and balance sound reproduction from high to low frequencies.
•The smooth horn path ensure maximum reproduction of low frequencies. The first breakthrough in smooth 115 tunnel.
•The separate side pillar ensure minimum disturbance to the horn tunnels and is height adjustable and angle adjustable. This is a total new design concept in 115.
•Drive Unit Recommended : PM7A
•Dimension: 400(W)x810(H)x350(D)
•Weight 40kg
•US$1,000.00(excluding the drive unit)
Continuous Internal Horn Path.

A

MT7

•Optimum phase coherence, proper time alignment and wide bandwidth are the basis of the design concept of this speaker. The mid is covered by the famed Seas coaxial drive unit. The rear mounted tweeter extends the frequency response to 30k. The newly developed Seas woofer covers the lower octaves. The base is incorporated with a cg stabilizer design which a sand box or weights can inserted into the cavity for further sound improvements.
•This is a very compact speaker and is a good choice for a modern home.
•The base has five screw sockets so users can use either 3 spike or 4 spike support.
•Dimension: 8”(W)x9”(D)x40”(H)
•Weight: 50kg
•Power handling: 100 watt
•Input impedance: 8 ohm
•Sensitivity: 89db
•Frequency response: 40 to 30k
•Crossover: composite
•Wood recommended: beech or mahagony pomele in piano finish
•US$3,000.00

PM1/2

•It is rack incorporatingCrystal platform for all shelves for absolute audiophiles.
•It is particularly suitable for small signal audio and video equipments
•Internal Dimension:
200/250H)x700(W)x500(D)mm
•External Dimension:
630(W)x800(D)x560(H)mm
•Customer made dimension: Optional Extra
•Spike: Standard
•US$2,700.00

RF Reduction Level 6

Ground Grid Control
•For direct earthing
•For connection with DC1 Dynamic Controller
•For connection with King Kong Platform for further noise reduction

Level 5 RF Shielding
Ground Grid Connector
C3 Support
C3 Support Daqmping
3 layer construction

TTL1

Special Turntable employing floating magnetic levitator

Motor Specification

Stroboscope
Magnetic Levitator
Arm Assembly
Motor Assembly

L'Art du Son

•L'Art du Son is a new and revolutionary record cleaning solution developed after years of research by founder and analogue devotee Martina Schoener. The cleaning fluid is sold as a concentrate which makes 5 liters of cleaning fluid when diluted with ordinary distilled water. We recommend making it up in small quantities as required, and storage in the dark. It contains no alcohol, and uses environmentally friendly ingredients. It produces a dramatic increase in playback clarity and resolution. Here is a review ofL'Art du Son, published in Positive Feedback magazine. The other benefit is that it is virtually odourless and so can be used indoors with no problem.
•US$60/bottle

CYM1/1

•It is a rack incorporating crystal platform for all shelves for absolute audiophiles.
•Internal Dimension:
250(H)x550(W)x500(D)mm
•External Dimension:
370(H)x650(W)x550(D)mm
•Adjustable Platform Height: Request
•Customer made dimension: Optional Extra
•Spike: Standard
•US$7,50.00

Ground Grid Control
•For direct earthing
•For connection with DC1 Dynamic Controller
•For connection with King Kong Platform for noise reduction

Crystal Vibration Energy Breaker Control ring

MX Gold Spike

CYM1/2

•It is a rack incorporating Crystal platform for all shelves for absolute audiophiles.
•Internal Dimension:
250/550(H)x500(W)mm
•External Dimension:
710(H)x650(W)x550(D)mm
•Adjustable Platform Height: Request
•Customer made dimension: Optional Extra
•Spike: Standard
•US$1,250.00

Ground Grid Control
•For direct earthing
•For connection with DC1 Dynamic Controller
•For connection with King Kong Platform for noise reduction

Crystal Vibration Energy Breaker Control ring

MX Gold Spike

S4 CYS

•A simple direct mechanical grounding design, simple to use
•Cleaner sound, better dynamics
•US patent 169104
•Internal sandbox
•Dimension:
Top plate: 165(W)x240(D)mm
Base plate: 215(W)x280(D)mm
Height: 650mm
•US$200.00, UPS/Post Air to USA US$180

S4 Structure Description

Level 1 RF Shielding
USA Mechanical Grounding Patent

S6 CYS

•Replacement of S5
•A mid size speaker stand for high energy speakers.
•A simple direct mechanical grounding design, simple to use
•Extra wood columns provide high energy absorption.
•US patent 169104
•Dimension:
Top plate: 190(W)x265(D)mm
Base plate: 240(W)x290(D)mm
Height: 610mm
•Weight: 10kg
•US$280.00, UPS/Post Air to USA US$200

S6 Assembly

S6 Wave Reflector
Level 1 RF Shielding
USA Mechanical Grounding Patent

S10 CYS

•Heavy duty speaker stand for high energy speaker (non flooring mounting) A speaker stand designed for speakers with 10"-15" woofer. The four sand pillers are designed for this type of high energy speaker and the Q tuner at rear would enable to stand to match the resonance of the speaker.
•Top plate is applied with anti skidding coating.
•Dimension:
Top plate: 32(T)x300(W)x290(D)mm
Base plate: 50(T)x320(W)x290(D)mm
Height: 460mm
•Customer made dimension: Optional Extra
•US$375.00, UPS to USA US$220

Q tuner for turning of speaker stand's resonance frequency.

S10 Structure Description

Q Tuner
Level 1 RF Shielding

S100 CYS

•A height adjustable speaker stand
•Changeable top plate for small to medium size speaker. Adjustable from 20" to 28" making it very flexible and suitable for most speaker in various circumstances. The base plate of speaker stand is reinforced by diecast metal plate to improve stability..
•Dimension:
Top plate: 200(W)x200(D)mm
Base plate: 295(W)x295(D)mm
Height: 460 - 700 mm extended
•Weight: 13kg
•Color Available: Black Ash, Walnut
•Other wood species/color: Optional Extra
•Changeable top plate for speaker size adjustments
•US$375.00, UPS to USA US$220

Height Adjustable from 460-700mm

External Sand Infill

S100 Structure Description

Raised Height
Sand Box
Level 1 RF Shielding
Inter-Changeable Top Plate

SX200

•A height adjustable speaker stand.
•The simple easy to use height adjustable screw make level adjustment a matter of seconds are the solid wood pillar
•The top plate is designed with vibration feedback control.
•Magnetic grounding is incorporated. Static Discharge Control could be grounded or use with Sound Mechanics DC1 Dynamic Controller.
•Color Available: Black Ash
•Weight: 14kg
•Other wood species/color: Optional Extra
•Changeable top plate for speaker size adjustments
•Antiskidding coating: Standard
•US$540.00, UPS to USA US$220

RF Reduction Level 2

Top plate angle adjustments

Height Adjustablefrom 460-660mm

Simple to adjust height screw

Level 2 RF Shielding
Minimum Height
Raised Height
Maximum Height
Sandbox
Continuous Height adjuster
Rear RF Connector
Angular Top Plate

SX500

•A speaker stand for medium energy speakers, the special double side column keep vibration feedback to a minimum.
•Top plate is designed with Vibrations Feedback Control (VFC) Technique.
•Magnetic grounding is incorporated. The special Static Discharge Control can be grounded or connected with Sound Mechanics DC1 Dynamic Controller.

• Level 2 RF Reduction
•The base incorporate easily to adjust spikes, making level adjustment extremely simple.
•Additional sand column is incorporated at the rear of the speaker stand.
•The height of S500 is adjustable 100 mm
•Finish available black ash.
•Dimension:
Top plate: 200(W)x380(D)mm
Interchangeable top plate minimum
Base plate: 285(W)x295(D)mm
Height: 550-660mm

•Antiskidding coating: Standard
•US$800.00, UPS to USA US$300

Level 2 RF Shielding
Adjustable Angel Top Plate
Top Plate Geometry
Rear RF Connector
Rear Additional Sand Column
Angular Top Plate
Model for Harbeth & Spendor
Model for Legacy

SX600 CS

•Heavy duty speaker stand for speakers with 12"/15"/18" A heavy duty speaker stand with multiple side column help vibration feed to a minimum. Top plate is designed with vibration feedback control and static discharge control, easy to adjust spikes, rear sand column are standard.
•Dimension:
Top plate: 350(W)x480(D)x32mm
Interchangeable top plate minimum dimension 228(W) x300(D)mm
Base plate: 380(W)x500(D)mm
Height: 380mm
Interchangeable column and pillar minimum height 10"
Custom made dimension: Optional Extra
•Weight: 35kg
•Finish available black ash. Other wood species, optional extra.
•Heavy duty easy adjust spike
•Changeable top plate and center pillar for dimension alterations
•Height Adjustable: 50mm
•Other wood species: Optional Extra
•US$800.00, UPS to USA US$304

RF Reduction Level 2

A

B1 Mk II Wave Ringer

•The next gen of wave ringers with full tuning options. Can be wall-mounted or stand-mounted.
•Dimension: 45(T)X480(W)x1000(D)
•Weight 10kg
•US$350.00

Stand:
•Weight 10kg
•US$80.00

B1 Tilted

B2 Wave Breaker

•Image Sharpener designed for Bass Standing Wave Breakup and Image Definition Improvement
•Unlikely conventional absorbing apparatus over absorbs certain frequencies and particularly their harmonics. When B2 is placed at the resonance point or standing wave point, it will break up the wave pattern and produce a cleaner and clearer sound.
•Dimension: 225(T)X275(W)x325(D)
•Wood Species Available: Blackwood, Walnut
•US$125.00

B2 設計慨念

B3 Wall Absorber

•An Acoustic Diffuser - a Solid Wood Design Diffuser with specially computed and tested dimension and structure, not only it acts as an diffuser, the solid wood would enhance a warm sound for the music lovers.
•Can be wall-mounted or stand mounted
•Dimension 45(T)x450(W)x1000(H)
•Wood species: Beech, Walnut, Black Ash, White, Off white
•US$350.00

B3 on Stand
B3 on Stand Tilted

B4 Acoustic Absorber

•Designed for low frequency control without the harshness of the conventional designs.
•Can be wall-mounted or stand mounted
•Dimension: 45(T)x450(W)x1000(H)
•Weight 10kg
•US$500.00

B4 on Stand
B4 on Stand Tilted
B4 掛條
B4掛牆

B5 corner wave breaker

•This acoustic absorber cylinder is specially designed for multi-directional absorption particularly the low frequencies.
•Dimension: diameter 250mmx1000mm (H)
•Weight 8kg
•US$400.00/pc

DC1 Dynamic Controller

•An Accessory designed to Fine Tune the Dynamics of a HIFI system. It is a bias control device for dynamic control of music. Most of the cursent sound improvement devices are frequency based. DC1 brings a new concept in audio tuning.
•The DC1 contains 2 selector switches. One for polarity and one for level housed in a special vibration control enclosure.
•OFC mesh wire 1.5M: Standard
•Highgrade AA battery: Standard
•US$100.00, Air Post: US$12

High purity mesh copper cable

A

Super Sandbox

•Super Sandbox, A new redesigned sandbox with three types of particle in-fills. There are two extra lots for you to apply your own personal selection. Recommended for clarity improvements on subwoofers
•Dimension: 50mmx100mmx250mm
•Finish: Walnut and Metallic finish
•US$35.00/pc

Screw Thread for additional Particle infill
使用說明

C2

•A simple wood support that enhance low frequencies.

•To support cables as cable risers

•Recommended for bass lacking system.
•It can also be used to enhance bass harmonics if placed in a rocking position on top of equipments.
•Dimension: 12mm(T) x 25mm(W) x 40mm(D)
•US$15/set 3
•Post Air US$5

C2 九式

Gold Resonator

• Gold Resonator Harmonic enhancer is designed to improve the high frequency harmonics of the HIFI system.
•Application:
a) Place one on top of the HI FI equipment in a rocking position. Disturbing vibrations can be dissipated and results in improvements in high frequency musical instruments.
b) For room acoustic improvement, place one with curve face upward at corners, or reflective locations. It will improve the high frequency of the room acoustics
•Dimension: Ø 18mm x 12mm
•US$15.00
•Post Air US$5

Design Theory

Platinum Resonator

•The rhodium plating extends the bandwidth further particularly the highs.
•Dimension: Ø 18mm x 12mm
•US$20.00
•Post Air US$5

Design Theory

C8W

•Employs metallic and graphite particles to dissipate unwanted vibrations. The multi-layer design enables a total number of 6 types of particle in-fills to enable a wide and even frequency response characteristics.(This a patented design of soundmechanics.net, US Patent number 5159104)
•Dimension: Ø 45 x 32mm (H)
•US$20.00
•Post Air US$8

C8XB

•Nano treated, a new generation of C8 wood cones by soundmechanics.net. Cavity Energy Transfer Technology is being fully applied under our German Patent. Very dynamic and good for sound tuning

•US$40.00
•Post Air US$8

MC88X

•The redesigned wood cone employed rare aged Blackwood. The Blackwood is nano treated . Special selected and processed materials maximize the performance of this model , replacing the old MC88 model which has been in the market for over ten years. It is a wood cone that all music lovers must have and can bring out the real treble sound. soundmechanics.net recommended to use this cone with the curve face downward.
•Dimension: Ø 45 x 32mm (H)
•US$100.00

•Post Air US$8

6 Moons Reveiw

化震方式

Patent Design
USA Cavity Patent

C100+

•For definition and imaging improvements. This upgrade model does not exhibit “metallic character” and is very liniar.

•Dimension: 45mm(Ø) x 32mm(H)
•US$170.00/set of 3

•Post Air US$15

Test Report

C100 + adaptor screw mount

•Screw mount of M6, M8, 3/8” British. Other screw thread, please specify.
•US$30.00/set of three (Together with C100+ forms C200 Cones at US$220/set three)
•Post Air US$7 (Together with C100+ Post Air is US$20/set of three)

C1.5

•C1.5 variable height
•Spike Support
•Adjustable height from 12mm to 18mm
•Dimension: Ø35mm, 15mm height
•US$15.00/pc
•Post Air US$5

使用方法 Manual

A

Super Sandbox

•Super Sandbox, A new redesigned sandbox from soundmechanics.net with three types of particle in-fills. There are two extra lots for you to apply your own personal selection. Recommended for clarity improvements on subwoofers
•Dimension: 50mmx100mmx250mm
•Finish: Walnut
•US$50.00/pc

使用說朋

Screw Thread for additional Particle infill

CY Crystal

• An Exceptional Electro-Mechanical Platform with Dynamic Magnetic Grounding Reduce Substantial RF and Vibration Interference on Audio and Video Systems. The platform is composed with completely separated three layers to ensure minimum interference of feedbacks (Including acoustic energy) and vibration energy created by equipments and loudspeakers, background noise due to RF intereference.

• Recommended to be used as a support platform for amplifiers,CD players, DAC.

• Magnetic grounding level 3 and static discharge control is incorporated.

The static discharge control can be connected to ground point or to DC1 Dynamic Controller.
•Dimension: 54(T)x480(W)x430(D)
•Weight: 7kg
•Spikes (set of 4): Standard
•Heavy Duty Ground Grid Connector: Optional Extra
•US$430.00/pc, Post Air to USA US$80

Level 3 RF Shielding
化震水晶環
隔離設計

PX5 XP

•A Platform Specially Designed for Floor Mounting Speakers and for Bookshelve speaker on rack.
•A high energy absorption platform designed for flooring mounting speakers. The patented multilaminor technology is employed to push the resonance beyond audio band. RF reduction technique (magnetic grounding level 2) is also incorporated into this platform. It is also suitable for smaller size amplifiers and CD drives.
•Dimension: 22(T)x275(W)x350(D)mm
Customer made dimension: Optional Extra
•Weight: 3kg
•Spikes (set of 4): Standard ⅜" metal spike
•Wood species: Walnut or Black Ash
•US$250.00/pair, Post Air to USA US$70

M8 metal spike

Front View
M8 Spike

CY Black Gold Platform

•An ultimate for the music lovers. Internally contains two Performance platform cores with reinforced antenna. Black Gold is very popular in jewelry, but we discover that it exhibits some very unique characters in sound improvements. This platform can also be used as an upgrade is soundmechanics.net HIFI racks.
•Dimension: 55(T)x595(W)x480(D)mm
•Weight: 8kg
•Spikes: Standard, Black Gold Spike
•US$600/pc, Post Air to USA US$200

RF Reduction Level 5

Level 5 RF Shielding
Dual RF Connectors
Black Gold Spikes